Tunnel Front Sight Insert Sets.
USA408 - Set of 15 interchangeable Inserts; Universal insert set
USA424 - Set of 18 interchangeable Inserts; For muzzleloading guns
USA425 - Set of 12 interchangeable Inserts; For B P cartridge Guns

Tunnel front sight base support enables the shooter to elevate the front sight an extra .193" due to the double dove tail.
Suits 3/8" dovetail.

Set of six interchangeable spirit level glass bubbles, (viles), of different colors to suit light conditions.
These fit front tunnel sights USA 426, 426A, 457, 462, 467 & 402.
Colors are: light green, red and light blue.

This insert is designed to replace the rear barrel sight when a tang sight is used to prevent canting the rifle and to promote long-range accuracy. (fitting may be required for guns manufactured by other companies than Pedersoli).
Insert includes one yellow bubble level, (vile)
Available in 3/8" or 1/2" dovetail base.

USA402 - 3/8" dovetail base.
USA402A - 1/2" dovetail base.

Buckhorn Ramp Rear Sight
Adjustable for elevation. 3 1/4" long fits 3/8" dovetail.

Sniper front sight for military muskets

This blued steel globe front sight is slotted to accept the classic Sharps sight inserts. Rotate the upper retaining spring to insert one of eighteen sight inserts, from the complete set, included with the sight.
Base - 3/8" dovetail
Height is .433" to centre of reticle.

USA469-A - with 18 interchangable inserts, (USA424)
USA469-R - with 12 interchangable inserts, (USA425)

Priced from $135.00 as reflected in your cart

Sharps Gemmer Rear Sight.

5 1/2" Long - For 3/8" Dovetail, Adjustable For Elevation.

Sharps Rear Ladder Sight including guard and mounting screw.
USA419 - Rifle
USA420 - Carbine

Long Creedmoor sight adjustable for elevation
Distance between the two mounting holes:
17/16” up to 2” (37,7 up to 54,4 mm).

Short Creedmoor sight, adjustable for elevation.
Distance between the two mounting holes:
1 7/16” up to 1 9/16” (37,7 up to 39,6 mm).

USA445 - Short Creedmoor, 2" Staff.
USA454 - Long Creedmoor, 4" Staff.

Priced from $150 as reflected in your cart

Creedmoor sight, adjustable for elevation and with a little windage adjustment in the eye piece.
Distance between the two mounting holes: 1 7/16” up to 1 9/16” (37,7 up to 39,6 mm).

USA436 - Long Creedmoor, 4" Staff.
USA433 - Short Creedmoor, 2" Staff.

The Trapdoor folding front sight can be used as a globe sight for long distance shooting or as a blade sight,
Dimensions
Dovetail Base - 3/8"
Dovetail Angle - 30*
Height - .448"

New Creedmoor sight for the 86/71 Lever Action rifle (S.740 / V.740 models). Easy to install in the slots on the bolt that are already provided for it.
The upper screw completes the mounting and it enables micrometric adjustment in elevation.
At the base on the right side there are two other screws, one is to lock and unlock the base of the eye piece dovetail, the other is for windage adjustment.

Weaver and Picatinny Rail Base with integral Rear Sight.

USA228 - For Lever Action Rifle
USA228A - For Round Barrels

Priced from $190.00 as reflected in your cart

This Hadley style eyepiece is interchangeable on Creedmoor sights
USA430, 431, 461, 430, 465, 404, 405, 406, 407 and 446.
With 8 viewing holes of different diameters:-
.012", .020", .031", .039", .051", .063", .078", .086"
( .3, .5, .8, 1, 1.3, 1.6, 2, 2.2 mm) placed on a rotating disk, which can be selected without disassembling or loosing the eye piece, following the available light.
The eye piece has a rubber ring to avoid any inconveniences due to recoil

Adjustable tang sight with rounded or squared base complete with mounting support.
Elevation is determined by the fixing screw at the base with further elevation possible by the eye piece sliding.
Windage is on the eyepiece.

USA442 - Squared base, Mortimer Creedmoor
USA468 - Rounded Base, Target Creedmoor
USA443 - Rounded base, elevation on the base only

English Rear Sight with flat base or convex and two adjustable folding leaves.
USA428 ---- Flat base
USA428-A - Convex Base

Fibre optic sights sets -
Rear sights are adjustable for elevation and windage, thanks to proper micrometer screws.
Priced from $145 as reflected in your cart.

Available for -
USA409 - Muzzleloading Rifles: Frontier, Kentucky, Tryon, Mortimer etc Front sight: with 3/8"dovetail base
Front Sight Height: Base of sight to top: .360"

Sometimes referred to as “Buckhorn” style.
Used on Trapdoor rifles from 1874 until superseded by Buffington style in 1884.
Side ramps are graduated to 500 yards and the ladder to 1500 yards. Slide has windage adjustment.
Includes mounting screws.
Rifle Sight ----- 4948
Carbine Sight - 4947

Adjustable tang sight for both elevation and windage.
Can be mounted on different rifles models
On the base, the holes distance makes it universal.
The holes distance is from 1 7/8” to 2 1/4” (47,7 to 57,4 mm)

Tunnel Sight with Spirit level to check parallelism.
Base - 3/8" - 30 degree dovetail.
Height - .433" high to centre of reticle, (insert)
Supplied with inserts.

USA462 - with 12 interchangeable inserts, (USA425)
USA467 - with 18 interchangeable inserts, (USA424

Priced from $290 as reflected in your cart

Tunnel Front Sight with Spirit Level and Windage adjustment.
A micrometric screw is used to correct for windage.
Base is 3/8" - 30 degree dovetail
Height - .492" or .689" high to centre of reticle (insert).
The sight comes with interchangeable inserts.

USA426 - .492" high and with 12 interchangeable inserts, (USA425)
USA426A - .492" high and with 18 interchangeable inserts, (USA424)
USA457 - .689" high and with 15 interchangeable inserts, (USA408)

High accuracy, the perpendicular adjustment to the barrel’s axis, makes it suitable to various guns.
It is adjustable for 3” (76,2 mm) in elevation and it has windage adjustment.
Distance between the two mounting holes: 1 3/4” about (45,30 mm).